What should I check before installing an EV charger at home?
Confirm the vehicle’s connector and onboard AC charging limit, your parking rights, sanctioned electrical load, phase supply and the cable route. Have a qualified installer assess earthing and protective equipment. A higher-rated charger will not make a vehicle charge beyond its supported limit.
Silex’s indicative listed options
| Option | Listed price | Coverage / use |
|---|---|---|
| Home AC 3.3 kW | Rs. 18,999 | Scooters & bikes |
| Home AC 7.4 kW | Rs. 42,999 | Cars — overnight |
| Commercial AC 22 kW | Rs. 89,999 | Societies & offices |
| DC Fast 30–60 kW | Custom quote | Highways & fleets |
Current website selections, not a binding offer. Confirm final scope, taxes, availability and written terms with Silex.
Begin with the vehicle, not the wallbox
Check the manufacturer’s approved charging equipment, connector and maximum AC input. The car’s onboard charger and the property’s supply can limit charging even when a wallbox has a larger power rating. Scooter charging equipment is not interchangeable with a car charger solely because both are described as EV products.
Discuss your normal driving and parking duration. Overnight parking can allow a different power choice from short daytime stops. A practical installation is one that replenishes the energy you actually use within the time your vehicle is parked, without asking the electrical supply to exceed its approved capacity.
Understand the current quotation assumptions
Silex currently lists home AC 3.3 kW equipment at ₹18,999 and home AC 7.4 kW equipment at ₹42,999. The quotation tool adds ₹3,500 for standard installation and wiring up to 15 metres, then applies its displayed 18% GST calculation. Extra cabling is charged at actuals. These are the website’s indicative terms, not a universal Lucknow installation price.
An electrical survey may identify additional work such as load enhancement, supply changes or a longer cable route. Confirm the scope of civil work, protection, earthing and commissioning in writing. Do not assume every such item is covered by a single standard-installation line.
Arrange a safe installation and handover
The Ministry of Power’s charging guidelines cover private, semi-public and public charging contexts. Use an appropriately qualified installer and equipment suited to the site. The survey should consider parking location, weather exposure, cable management and safe access as well as electrical capacity.
At handover, obtain equipment identification, warranty information, the service contact and instructions from the installer and manufacturer. Report damaged cables, abnormal heat or repeated protective-device trips rather than continuing to use the equipment. This article is a purchase checklist, not a do-it-yourself wiring guide.
- Vehicle connector and supported AC input
- Dedicated parking and owner or society consent
- Sanctioned load and supply phase
- Cable route and distance
- Protection, earthing and installation scope
- Commissioning, warranty and service contact
Your questions, answered
Will a 22 kW AC charger always charge faster than 7.4 kW?
No. Charging is limited by the vehicle, available supply and equipment. Verify the car’s AC capability and the site’s electrical capacity first.
Can I install a charger in rented parking?
Confirm the landlord’s and, where applicable, society’s consent, connection arrangements and parking rights before planning permanent equipment.
Sources & further reading
General purchase guidance. Check current official rules, manufacturer instructions and your written quotation before proceeding. Images are illustrative, not documented Silex installations or verified model photographs.



