Illustrative solar panels on a residential roof

Solar · Uttar Pradesh

3 kW vs 5 kW solar for your UP home: choose by units, not just bills

A practical comparison of 3 kW and 5 kW rooftop solar using annual electricity consumption, roof conditions and transparent generation assumptions.

By Silex Energy Solutions

Is a 3 kW or 5 kW solar system better for my home?

Choose capacity from your electricity consumption in kWh, usable roof area, shading and future loads. Silex’s calculator assumes 120 units per kW per month: 360 units for 3 kW and 600 for 5 kW. These are planning estimates, not measured Lucknow output or guaranteed savings.

Use twelve months of units

A rupee bill can include fixed charges, arrears and other items that do not translate directly into electricity consumption. Start with the kWh or units shown on your bills. Include summer air-conditioning months and quieter months, then calculate an annual total and monthly average.

A home averaging 300 units and a home averaging 600 units have different starting requirements even if their roof area is identical. Future air conditioners, an electric vehicle or a change in occupancy can alter consumption. Record these plans before choosing a capacity rather than buying the largest installation that physically fits.

Treat generation as a range, not a promise

The website’s planning assumption of 120 units per kW each month makes the comparison easy: 3 × 120 = 360 units, while 5 × 120 = 600 units. Actual production varies with weather, season, orientation, shade, equipment performance and cleanliness. An annual yield assessment is more useful than a promise that every month will look the same.

Savings also depend on when you consume electricity and how exports are accounted for by the applicable DISCOM. The calculator’s ₹7 per-unit assumption is an example tariff, not a statement that every Uttar Pradesh connection pays that rate. Use the tariff on your own bill for a personalised estimate.

Check the roof and electrical connection

A survey should identify shade from trees, tanks and nearby buildings, suitable structure positions, safe access and the roof’s condition. Leave room for maintenance and water drainage. Panel dimensions and the chosen layout determine the area required; avoid a universal square-foot rule that ignores the actual equipment.

Ask whether your sanctioned load or phase supply needs changes and which DISCOM approvals apply. Then compare two itemised proposals with the same brand and installation scope. For eligible households, the referenced central assistance cap is the same at 3 and 5 kW, so size the system for need rather than an assumed larger subsidy.

  • Twelve months of electricity units
  • Expected new appliances or EV charging
  • Shade assessment and usable roof layout
  • Sanctioned load and DISCOM requirements
  • Gross installed cost and maintenance plan

Your questions, answered

Will 3 kW make my electricity bill zero?

Not necessarily. Seasonal production, consumption, fixed charges and export-settlement rules affect the remaining bill. A capacity label alone cannot guarantee a zero bill.

Can I expand the system later?

Possibly, but inverter capacity, roof layout, electrical protection and DISCOM approvals may need changes. Ask for an expansion-ready design before installation.

Sources & further reading

General purchase guidance. Check current official rules, manufacturer instructions and your written quotation before proceeding. Images are illustrative, not documented Silex installations or verified model photographs.

Your next step with Silex

Compare options for your home, parking or daily commute.

Explore solar & AMC

Continue reading